For those not wanting to get sucked into BBOX's web of evil that is the Midwest thread.

Finally someone started one!

I've got to get some whoring in before I leave for the UK on sunday.

Where and how long you going for?

you think BBOX will not extend his 'web of evil'? you do know him, right?

so therre was a prius at the autox sun running in STS. it was creepy, it didnt make a noise while on track. Its just not right

Bristol for the better part of a week (leave Sun, get back really late on Fri). We've got meetings Tues - Thurs morning. I fly through London, and head back on Fri morning. I should be able to hit Windsor castle on Thurs afternoon during the drive back to London.

Gotta love sight seeing on company time!

How did they class it? The subjest has come up and locally we would put it in STO which is a local class for anything on street tires. The whole two engien thing really makes it interesting, and there is a lot of power potential if you mod both of them.

I won't complain. Depending on time available, I might make a quick run out to Stonehenge which is just outside Bristol.

Anyone know where I can buy a Volt Meter gauge?

Look at you, fuckin wannabes. ROFL

i hear rista has one for sale


I have no idea how they classed it. He ran on sat and was all ready classed. If he shows up again i will definately discuss it with him, but i was in no condition on sun to talk about it

ROFL ROFL ROFL Nice Jason.

RIP Atomic Internet's Bandwidth. You fought the good fight but ultimately could not defeat the NECO post whores.

We're more like a pack of locusts than anything else though. We come in, strip a place of all its bandwidth and then move on.

Rista scares me!

Who's Rista?

The originator of the Undead Gateway thread and our former resident hill billy.

Former? does that make me our current resident Hill Billy? im not sure i qualify.

Well he doesn't exactly check in very often anymore.

Humm maybe i am a hill billy ... im good with explosives... and i know how to do crazy crap like that. I just cant stand the Busch Beer .... gotta drink my budwieser of some sort.

its been raining all day long, Im glad the weather held out long enough for fest and the autox.

I get to start building a sound booth tomorrow. been working on the plans all day. But the good thing is that i get the giant dent out of the car tommorow morning

i got my new and improved radio installed in the 3L, a tape deck! We gotta get terry in here

I told terry we were all over here, he said he didnt want to know that cause "Im getting hella work done"

dont know if he'll be here or not

just looked at whats playing at my drive in this weekend, Cars and Pirates rofl. we went and saw piirates last night, it was good

Now you just gotta get a new and improved engine in the 3L. ;)

Pot meet kettle.

Mine's on the way. ;)

you said that in march

How's yours runnin?

the same as your new one is

you think ill get mine running before you get your new motor going? I do

Damn dude, relax, I'm just bustin your balls.

In all seriousness though, when do you think you'll have the new up and going?

ball busting cant go both ways??

Im shooting for runing it at the Aug 20th event i have, so i might have to make a road trip or 2 to break in the motor properly

It can, I just didn't want you getting actually upset. I know how bad I felt for the twelve hours or so when I thought my car was fucked, so I can only imagine how you feel.

What build are you going with> Another full 3L?

yup, i think im just gonna get a new crank, put some clevite berings in there and call it a day, im gonna get kellys pullies to put on there as well as an accusump prolly


I know my motors f'd, you just thought yours was.

An Accusump should be required for 3L swaps, given their current track record.

Yep oil is good.

going to the dent dr today. Prolly going to start on some of the small stuff on the 3L tonight, getting to hood off, draining the fluids and what not.

you guys every pulled the motor w/o pulling the trans out as well? I think i can take the bolts off the bell housing and slip it out of there

I've never tried. Does it seem like it would be any easier?

it would save me a lot o tranny fluid and havving to pop the axles out. I think that if i take out the 3 bolts that hold the spindle on and take the strut loose that should give me enough play to move around to get the clutch past the bell housing

Tom, I was just kidding...I know who Rista is.

Jason, you still want my pullies? It was $165 shipped right?

woot the original is here! can we transfer this to NECO once its back on-line?

yes, I'm just kidding

The original post whore thread or the original post whore? ;)